How to Charge Your Crave Charger Cable: A Quick Guide

Your Crave charger cable is the quiet workhorse behind every glowing, ready-to-go moment with your pleasure jewelry. Whether you're powering up a Vesper necklace or a Wink+ for the evening, knowing how to charge and care for the cable keeps your favorite pieces dependable for years.

This guide walks through the simple steps of charging your Crave charger cable, offers practical tips for extending its life, and explains what to do when things don't go as smoothly as expected.

Getting to Know Your Crave Charger Cable

Most Crave products, including the Vesper and Flex, use a magnetic charger cable. The cable attaches to the device via a magnetic connection, which makes it easy to snap into place without fiddling with pins or ports. The magnetic charger is designed for convenience, but it also requires a bit of care to keep the connection strong.

Before you begin, find a clean, dry surface and make sure the charging contacts on both the cable and your device are free of dust or debris. A quick wipe with a soft, dry cloth is usually all it takes to ensure a solid connection.

• Check the contacts for dust or lint before charging.
• Use the included USB port or a standard USB adapter to plug in the cable.

Step-by-Step: How to Charge Your Crave Device

First, plug the USB end of the Crave charger cable into a power source. This can be a laptop, a wall adapter, or any standard USB port. Next, bring the magnetic end of the cable near the charging points on your device—it will snap into place automatically. You'll know it's connected when the device's indicator light turns on.

Let your device charge until the light changes color or turns off, depending on your model. Most Crave devices take about two hours to reach a full charge. Once charged, gently pull the cable away from the device and store it in a safe place.

• Avoid charging overnight unless your device has overcharge protection.
• Keep the cable away from water and extreme heat.

Caring for Your Charger Cable

Your Crave charger cable can last a long time with proper care. Avoid bending the cable sharply or pulling it by the cord when unplugging. Instead, grip the connector firmly and pull straight out. This prevents stress on the wires and keeps the magnetic tip aligned.

Store the cable coiled loosely, not tightly wrapped, to prevent kinks. If the magnetic connection feels weak or the device doesn't charge, check for debris on the contacts and clean them gently with a dry cloth or a cotton swab. Avoid using liquids or abrasive cleaners.

• Coil the cable loosely when storing.
• Clean the magnetic contacts regularly to maintain a strong connection.

Troubleshooting Common Charging Issues

If your Crave device isn't charging, start by checking the power source. Try a different USB port or adapter. Next, verify that the magnetic cable is properly aligned with the device's contacts—sometimes a slight misalignment prevents charging.

If the device still won't charge, inspect the cable for visible damage. If you notice fraying or a loose magnetic tip, it may be time to replace the cable. For devices like the Vesper Cap and Chain, the charging process is the same, but always refer to the specific instructions that came with your product.

• Test the cable with another device to isolate the problem.
• Contact customer support if the cable appears damaged.

Charging your Crave charger cable is a simple routine once you know the steps. With proper care and a little attention to the magnetic connection, your pleasure jewelry will be ready whenever you are. Keep your cable clean, store it gently, and you'll enjoy reliable power for years to come.